Filter
Top Products
English
19
8. For drilling into brick
CAUTION:
ⅷ When the hammer drill is used continuously, the body may be heated. If this happens,
leave the hammer drill to cool.
ⅷ Excessive pressing force never increases drilling speed. It will not only damage the drill
tip or reduce working efficiency, but could also shorten the service life of drill bit.
Operate hammer drill within 20 – 30 lbs. (10 – 15 kg) pressing force while drilling into
brick.
THE SCOPE AND SUGGESTIONS FOR USES
Table 4
Work Cap position Suggestions
Brick Use for drilling purpose.
Wood
Drilling
Steel
Use for drilling purpose.
Aluminum
Screw
Small
1 – 22
Use the bit and socket matching the screw
tightening
screw diameter.
Wood
1 –
Use after drilling a pilot hole.
screw
DV14DV•DV18DV-E.E65 6/21/02, 5:06 PM19