Hitachi ET 18DM Battery Charger User Manual


 
English
8
APPLICATIONS
For charging the HITACHI batteries types EB9, EB12, EB14, EB18 series.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING: Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
1. Insert the plug of battery charger into
the receptacle.
When the plug of battery charger has been
inserted into the receptacle, pilot lamp will
blink in red. (At 1-second intervals)
WARNING:
Do not use the electrical
cord if damaged. Have it
repaired immediately.
Fig. 2
SPECIFICATIONS
EB1820L
EB1830HL
EB18B
EB1820
EB1830H
EB14B
EB1220BL
EB12S
EB12B
EB9S
EB9B
Input power source Single phase: AC120V 60Hz
Charging time Approx. 9 minutes ............... EB9S, EB12S
Approx. 12 minutes ............. EB9B, EB12B, EB1220BL
Approx. 14 minutes ............. EB14B, EB18B, EB1820, EB1820L
Approx. 28 minutes ............. EB1830H, EB1830HL
Charger
Charging voltage
..................
DC 9.6 18V
Charging current
....................
DC 12A (9.6 12V), 9A (14.4 18V)
Weight 3.5 lbs (1.6kg)
ADAPTER (ET18-18A)
Applicable cordless tools DS18DMR, C6DC2, CR18DV, UB18D
Weight 3.1 lbs (1.4kg)