Filter
Top Products
English
6
SPECIFIC SAFETY RULES AND SYMBOLS
1. ALWAYS use proper guard with grinding wheel. A guard protects operator
from broken wheel fragments.
2. Accessories must be rated for at least the speed recommended on the tool
warning label. Wheels and other accessories running over rated speed can fly
apart and cause injury.
3. Hold tools by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with a
“live” wire will make exposed metal parts of the tool “live” and shock the
operator.
4. ALWAYS wear ear protectors when using the tool for extended periods.
Prolonged exposure to high intensity noise can cause hearing loss.
5. Use only a depressed center wheel with a rated capacity which is GREATER
than 13300 RPM for G12SA2 and 12000 RPM for G13SB2. Using any wheel a
rated capacity LESS than 13300 RPM and/or an incorrect sized wheel (see
SPECIFICATIONS at page 10) may result in wheel breakage, flying wheel
fragments, and resulting in death or serious injury.
6. NEVER touch moving parts.
NEVER place your hands, fingers or other body parts near the tool’s
moving parts.
7. NEVER operate without all guards in place.
NEVER operate this tool without all guards or safety features in place and in proper
working order. If maintenance or servicing requires the removal of a guard or safety
feature, be sure to replace the guard or safety feature before resuming operation of the
tool.
8. Use right tool.
Don’t force small tool or attachment to do the job of a heavy-duty tool.
Don’t use tool for purpose not intended —for example— don’t use circular saw for
cutting tree limbs or logs.
9. NEVER use a power tool for applications other than those specified.
NEVER use a power tool for applications other than those specified in the Instruction
Manual.