Filter
Top Products
3
To maintain the effectiveness of the double insulation system, follow the precautions
described below:
1. Always contact your dealer or an authorized service center when assembling,
disassembling or replacing parts other than accessories or carbon brushes. Improper
assembly and/or replacement with wrong parts may result in eliminating the double
insulation-feature.
2. Clean the exterior of the power tool with a soft cloth moistened with soapy water, and
dry thoroughly. Chloric solvent, gasoline, and thinner will cause plastic components to
dissolve.
REPLACEMENT PARTS
When servicing use only identical replacement parts.
PARTICULAR PRECAUTIONS ON USING DEMOLITION HAMMER
In addition to the precautions mentioned above, following particular precautions for this
Demolition Hammer should be followed.
1. Wear earplugs to protect your ears during operation.
2. Do not touch the bit during or immediately after operation. The bit becomes very hot
during operation and could cause serious burns.
3. Before starting to break, chip or drill into a wall, floor or ceiling, thoroughly confirm
that such items as electric cables or conduits are not buried inside.
NAME OF PARTS
Fig. 1
NOTE:
Install the side handle with the supplied 4 bolts and 4 spring lock washers. Tighten the
bolts securely with the supplied wrench.
Front cover
Retainer
Side handle
Housing
Handle
Name plate
Bolt, Spring lock washer
(M8 x 30)
Housing cover
Hexagon socket
hd. bolt (M5 x 10)
Tail cover
Switch trigger