Filter
Top Products
1
We sincerely thank you for selecting a HITACHI POWER TOOL. To operate this power tool
safely and efficiently, please read this INSTRUCTION MANUAL carefully to get a good
understanding of the precautions in operation, capacity of the power tool, use and the like.
IMPORTANT INFORMATION: SAFETY RULES FOR THE POWER TOOL
WARNING: When using the power tool, following basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and personal injury.
READ ALL INSTRUCTIONS
1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
2. CONSIDER WORK AREA ENVIRONMENT.
Don’t expose power tools to rain.
Don’t use power tools in damp or wet locations.
Keep work area well lit.
Don’t use the power tool in presence of flammable liquids or gases.
Power tools produce sparks during operation. They also spark when switching ON/
OFF. Never use power tools in dangerous sites containing lacquer, paint, benzine,
thinner, gasoline, gases, adhesive agents, and other materials which are combustible
or explosive.
3. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces.
For example: pipes, radiators, ranges refrigerator enclosures.
4. KEEP VISITORS OR CHILDREN AWAY. Do not let visitors or children contact the power
tool or extension cord. All visitors or children should be kept away from work area.
5. STORE IDLE POWER TOOLS. When not in use, power tools should be stored in dry,
and high or locked-up place-out of reach of children.
6. DON’T FORCE THE POWER TOOL. It will do the job better and safer at the rate for
which it was intended.
7. USE RIGHT POWER TOOLS. Don’t force a small power tool or attachment to do the job
of a heavy-duty tool. Don’t use the power tool for purpose not intended - for example -
don’t use circular saw for cutting tree limbs or logs.
8. DRESS PROPERLY. Do not wear loose clothes or accessories. They can be caught in
moving parts.
Rubber gloves and non-skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
9. USE SAFETY GLASSES. All persons in the area where power tools are being operated
should also wear safety eye protectors, and face or dust masks if cutting operation is
dusty.
10. DON’T ABUSE CORD. Never carry power tools by cord or yank the cord to disconnect
the power tool from receptacle. Keep the cord from heat, oil and sharp edges.
11. DON’T OVERREACH. Keep proper footing and balance at all times.
12. MAINTAIN POWER TOOLS WITH CARE. Keep power tools sharp and clean for better
and safer performance.
Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and if damaged, have repaired by the authorized service
center.
Inspect extension cords periodically and replace them if damaged.
Keep handles dry, clean, and free from oil and grease.