Hitachi SV 13YA Sander User Manual


 
English
12
Material
Grain
Dial scale
Rough grinding Fine grinding
Paintwork:
Sanding 180 400 3 – 6
Repairs
(scratches, rust spots) 120 240 2 – 4
Stripping 40 80 2 – 4
Wood:
Softwood 60 – 80 240 3 – 6
Hardwood 60 180 3 – 5
Veneers 240 320 2 – 4
Metals:
Aluminium 80 240 2 – 4
Steel 60 240 3 – 6
Stainless steel 120 240 3 – 6
By adjusting the dial, match the speed to the material and type of work.
NOTE: Please use this table as a standard.
RANDOM ORBIT SANDER OPERATION
WARNING: Never apply water or grinding fluid when sanding. This could result in
electrical shock.
1. How to hold the random orbit sander
While gripping the housing, lightly press the
sander against the surface to be sanded so
that the sanding paper uniformly contacts
the surface, as shown in Fig. 6. DO NOT
apply excessive pressure to the sander while
sanding. Excessive pressure may cause
overload of the motor, reduced service life
of the sanding paper, and lowered sanding
or polishing efficiency.
2. How to move the random orbit sander
Move the sander by either moving it up and
down or by moving it in circles while
gradually progressing in a sideways
direction. (Figs. 7 and 8)
Fig. 6
Fig. 7