Filter
Top Products
English
7
SPECIFIC SAFETY RULES AND SYMBOLS
1. Accessories must be rated for at least the speed recommended on the tool warning
label. Accessories running over rated speed can fly apart and cause injury.
2. Hold tools by insulated gripping surfaces when performing an operation where the tool
may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed
metal parts of the tool “live” and shock the operator.
3. ALWAYS wear ear plugs when using the tool for extended periods. Prolonged exposure
to high intensity noise can cause hearing loss.
4. NEVER place hands or body parts near the accessories attached to the polisher during
operation.
5. NEVER use accessories which are broken or deformed or worn away.
6. NEVER use the polisher in places where the sparks generated by the polisher can cause
explosion, such as where flammable materials or gases are present.
7. NEVER push in the lock lever while the spindle is running.
8. ALWAYS wear eye protection that meets the requirement of the latest revision of ANSI
Standard Z87.1.
9. ALWAYS wear a mask or respirator to protect yourself from dust or potentially harmful
particles generated during the grinding operation.
10. ALWAYS firmly grip the body handle and side handle while operating the polisher.
11. ALWAYS follow the instructions contained in this manual when replacing the accessories.
12. NEVER leave the revolving tool unattended on the floor.
13. NEVER mount a depressed center wheel on this tool and attempt to use it as a disc
grinder.
14. Definitions for symbols used on this tool
V ............. volts
Hz ........... hertz
A ............. amperes
n
o ............ no load speed
W ............ watt
............ Class II Construction
---/min .... revolutions per minute