Hitachi WH12DMR(HH) Drill User Manual


 
JS1300 1.3mm Straight Shears
• 360° swivel shear head for increased
manoeuvrability
• Large variable speed trigger for
controlled cutting speed
• Brushes are easily accessible for fast
replacement
• Lock on button for continuous
operation
JS1600 1.6mm Shears
• Blade design results in no material loss
• Body grip design with a paddle switch
for easy one handed operation
•A lock off switch prevents accident
starting
• Built-in thickness gauge for
convenience
JS1660 1.6mm Straight Shears
• Ideal for straight cutting
• Mar-free model has a stepped
blade, shims for blade adjustment to
minimise burrs
JS1670 1.0mm Straight Shears
• Cuts close curves, right or left, in
30mm radius mild or stainless steel
• Visible cutting line
• Continuous metal curl in one direction
for easier operation
JS3200 3.2mm Shears
• For heavy duty cutting up to 3.2mm
mild steel and 2.5mm stainless steel
• Blades have 4 cutting edges each
• Built-in thickness gauge
• Ball and needle bearing construction
for long tool life
• Highly visible sight line for precise
following of patterns
LC1230 305mm Metal Cutting Saw
• Powerful 1,750W motor
• Lock off button prevents accidental
starting
• Tool-less guide plate adjusts 0°-45° for
quick and easy mitre cutting
• Large cast aluminium base for stability
• Externally accessible brushes for easy
maintenance
LS0714 190mm Slide Compound Saw
• Four steel slide arms on linear bearings
move in two stages, to give this
190mm saw a massive 300mm width
of cut
• 1,010W motor
• Bevel cuts up to 45° left or 5° right
perfect when you are undercutting
boards for a super snug fit
LS1013 260mm Slide Compound Saw
• 1,430W motor
• Compound and mitre cuts to 45° left
and right
• Dust extraction to bag or can be
connected to dust extraction system
• Self closing safety blade cover
• Constant speed control, ideal for
cutting into even the hardest timbers
LS1040 260mm Compound Mitre Saw
• Heavy duty 1,650W motor
• Precision machined aluminium base,
with fully calibrated angles
• Bevel cuts 45° left only
• Electric brake
• Removable safety lock button
• Dust extraction to bag or dust
extraction system
LS1214 305mm Slide Compound Mitre Saw
•The deepest cutting capacity of any
305mm slide saw on the market,
cutting a huge 115mm deep
• Powerful motor 1,650W
• Precision bevel cutting 45° both left
and right, with positive stop at 33.9°
ideal for crown moulding
• Mitre cutting is a breeze with the base
rotating 52° right and 47° to the left
with positive stops at all common
angles
UT120 Power Mixer
• Dial up variable speed control makes
easy batch mixing and consistency in
materials
• Electronic speed control for soft start
up, constant speed, pre-selectable
speed
• Thermal and current overload
protection for long durability
• Full metal gearbox
• Lock on switch
NHP1310 13mm 2 Speed Hammer Drill
• Powerful 600W motor
• Quick action change dial for hammer
and rotation or rotation only
• Ergonomic handle design for comfort
and control
• 2 speed gear selection with variable
speed in both ranges gives you greater
control and accuracy
Page 38 United Tools National Catalogue 2006