Hitachi WR12DM2 Impact Driver User Manual


 
English
7
IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE
CORDLESS IMPACT DRIVER
WARNING: Death or serious bodily injury could result from improper or unsafe use
of the cordless impact driver. To avoid these risks, follow these basic
safety instructions:
1. Never use this driver handle for any application other than those in this manual.
2. Never place hands or other body parts near the drill bit or chuck during operation.
Hold the impact driver by its handle only.
3. When working in high places, always make sure that ther is no one below before starting
to work.
4. Always wear eye and ear protection when you work.
5. Always install the driver bit securely. A loose bit is dangerous because it can come
loose while you are working.
6. Always use the driver bit that matches the screw size.
7. Always have the screw you are screwing in and this impact driver in a straight line.
Working with this impact driver at an angle to the screw can damage the screw head
and will not give the prescribed tightening torque.
IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE
CORDLESS IMPACT WRENCH
WARNING: Death or serious bodily injury could result from improper or unsafe use
of the cordless impact wrench. To avoid these risks, follow these basic
safety instructions:
1. Never use this wrench handle for any application other than those in this manual.
2. When working in high places, always make sure that there is no one below before
starting to work.
3. Always wear eye and ear protection when you work.
4. Confirm whether the socket has any crack in it.
5. Attach the hex. socket securely onto the anvil. If the hex. socket is insufficiently secured,
it may drop out and cause an accident. For hex. socket attachment refer to “OPERATION”
on page 16.
6. Confirm the tightening torque by a torque wrenck before use in order to ascertain the
correct tightening torque to be used.
7. If a universal joint is used, be sure not to operate the unit in a no-load condition.
Operating in this condition is dangerous. When the socket section spins around it may
cause injury to hands or bodies, or the resulting intense vibration may cause the user
to drop the tool.
8. Be careful that foreign matters do not block the holes located on both sides of the
handle. Also do not close the holes with a tape. The holes act an important role.