Hobart Welding Products 210 Welder User Manual


  Open as PDF
of 4
 
3
ACCESSORIES
Reversible V-Groove Drive Rolls
for Mild Steel Wire
#202925
.023 and .030/.035 in. (0.6 mm and 0.8/0.9 mm)
#407230-004
.023 and .045 in. (0.6–1.1 mm)
Reversible V-Knurled Drive Rolls
#193330
.030 and .035 in. (0.8 and 0.9 mm)
#193331
.039–.045 in. and .052–1/16 in.
(1.0 –1.1 and 1.3–1.6 mm)
MIG GUN AND ACCESSORIES
M-10 Replacement Gun #195605
10 ft. (3 m) cable. Gun is designed to run
.030–.035 in. (0.8–0.9 mm) wire.
Contact Tips
(See chart on below)
MIG Nozzle
(See chart below)
Protects tip adapter and
focuses gas coverage.
Gasless Flux Cored Nozzle
(See chart below)
For use with self-shielding
flux cored wires. Improves
visibility, eases access in
tight corners, protects tip adapter/gas diffuser
from spatter and from shorting to the work piece.
Usable with H9, H10, M10, and M15 torches.
Tip Adapter
(See chart below)
Replacement Liners
(See chart below)
SPOOL GUN AND ACCESSORIES
Hobart Spool Gun 3035-20 #300143
Welds 14 gauge up to 1/4 in. (6.3 mm) thick
aluminum with the IronMan 210.
Comes Complete With:
20 ft. (6.1 m) cable and gas hose
Spool gun conversion kit consisting of
control switch and gas diverter valve
Enclosed wire spool compartment with
internal spool hub tension adjustment
for 4 in. (102 mm) rolls of wire
For .030–.035 in. (0.8–0.9 mm) aluminum,
steel and stainless steel
Rated 150 amps, 60% duty cycle
Contact Tips (5 per package)
#199730 For .023 in. (0.6 mm) wire
#186419 For .030 in. (0.8 mm) wire
#186406 For .035 in. (0.9 mm) wire
Nozzle #186405
Drive Roll (1)
#199731 For .023 in.
(0.6 mm) wire.
#186413 For .030/.035 in.
(0.8/0.9 mm) wire.
Push Roll (1)
#199732 For .023 in.
(0.6 mm) wire.
#186414 For .030/.035 in.
(0.8/0.9 mm) wire.
CONSUMABLES
Item Hobart Package Part #* Miller Package Part #**
Contact Tips
.023/.025 in. (0.6 mm) #770174 (5 per package) #087 299 (10 per package)
.030 in. (0.8 mm) #770177 (5 per package) #000 067 (10 per package)
.035 in. (0.9 mm) #770180 (5 per package) #000 068 (10 per package)
.045 in. (1.2 mm) #770183 (5 per package) #000 069 (10 per package)
MIG Nozzle (Standard) #770404 #169 715
Gasless Flux Cored Nozzle #770487 #226 190
Tip Adapter #770402 #169 716
Replacement Liners
.023/.025 in. (0.6 mm) #196139 #194 010
.030/.035 in. (0.8/0.9 mm) #196139 #194 011
.035/.045 in. (0.9/1.2 mm) #196140 #194 012
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.
 previous