Filter
Top Products
OM-227 978 Page 44
10-3. Optional Drive Rolls
For All Feed Head Assemblies
PART NO.
WIRE DIAMETER
INCHES (mm)
202 925 .023/.025 (.6) and .030/.035 (.8 and .9)
202 926 .030/.035 (.8 and .9) and .045 (1.2 VK Groove)
10-4. Options
PART NO. DESCRIPTION REMARKS
770 187 Running Gear/Cylinder Rack For One Small Gas Cylinder, 100 lb (45 kg) max.
194 776 Small Running Gear/Cylinder Rack For One Small Gas Cylinder, 75 lb (34 kg) max.
231 204 H-14 Replacement Gun 10 ft length/.030-.035 wire size
300 173 DP 3035-20 Spool Gun For push/pull wire feeding
195 186 Protective Cover Weatherproof nylon
212 492 Regulator/Flowmeter For use with CO
2
shielding gas, 10−50 CFH
144 108 Gas hose, 5 ft For use with regulator/flowmeter 212 492
10-5. Consumables
ITEM HOBART PACKAGE NO.* MILLER PACKAGE NO.**
Contact Tips
.023/.025 in (0.6 mm) 770 174 (5 per package) 087 299 (10 per package)
.030 in (0.8 mm) 770 177 (5 per package) 000 067 (10 per package)
.035 in (0.9 mm) 770 180 (5 per package) 000 068 (10 per package)
.045 in (1.2 mm) 770 183 (5 per package) 000 069 (10 per package)
MIG Nozzle (Standard) 770 404 169 715
Gasless Flux Cored Nozzle 770 487 226 190
Tip Adapter 770 402 169 716
Replacement Liners
.023/.025 in (0.6 mm) 196 139 194 010
.030/.035 in (0.8/0.9 mm) 196 139 194 011
.035/.045 in (0.9/1.2 mm) 196 140 194 012
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.
NOTE: If individual parts are required, see Parts List chapter of this manual for part number to order.