Hobart Welding Products 250 Welding Consumables User Manual


  Open as PDF
of 4
 
3
ACCESSORIES
Reversible V-Groove Drive Rolls
for Mild Steel Wire
#202925
.023 and .030/.035 in. (0.6 mm and 0.8/0.9 mm)
#407230-004
.023 and .045 in. (0.6–1.1 mm)
Reversible V-Knurled Drive Rolls
#193330
.030 and .035 in. (0.8 and 0.9 mm)
#193331
.039–.045 in. and .052–1/16 in.
(1.0 –1.1 and 1.3–1.6 mm)
MIG GUN AND ACCESSORIES
M-25 Replacement Gun
#169596 12 ft. (3.7 m)
Gun designed to run .030–.035 in.
(0.8–0.9 mm) wire.
#169599 15 ft. (4.6 m)
Gun designed to run .035–.045 in.
(0.9–1.2 mm) wire.
Both guns are rated at 250 amps, 100% duty
cycle using CO
2
gas, and 250 amps, 60% duty
cycle using mixed gas.
Contact Tips
(See chart on below)
Nozzle
(See chart below)
Adapter
(See chart below)
Replacement Liners
(See chart below)
SPOOL GUN AND ACCESSORIES
Hobart Spool Gun 3545-20 #300144
1 lb. spool gun rated at 200 A, 60% duty cycle.
Includes 20 ft. cable assembly. When combined
with Ironman 250, this spool gun welds with
.030 –.047 in. wire on 14 ga – 3/8 in. thick
aluminum.
Contact Tips (5 per package)
#199387 For .030 in. (0.8 mm) wire.
#199388 For .035 in. (0.9 mm) wire.
#199389 For .047 in. (1.2 mm) wire.
Nozzle #199386
Drive Roll (1)
#186413 For .030/.035 in.
(0.8/0.9 mm) wire.
#199396 For .047 in.
(1.2 mm) wire.
Push Roll (1)
#186414 For .030/.035 in.
(0.8/0.9 mm) wire.
#199397 For .047 in.
(1.2 mm) wire.
CONSUMABLES
Item Hobart Package Part #* Miller Package Part #**
Contact Tips
.023/.025 in. (0.6 mm) #770174 (5 per package) #087 299 (10 per package)
.030 in. (0.8 mm) #770177 (5 per package) #000 067 (10 per package)
.035 in. (0.9 mm) #770180 (5 per package) #000 068 (10 per package)
.045 in. (1.2 mm) #770183 (5 per package) #000 069 (10 per package)
Flush Nozzle 5/8 in. (16 mm) orifice #196138 (2 per package) #169 726
Tip Adapter #770403 #169 728
Replacement Liners
.023/.025 in. (0.6 mm) #196139 #194 010
.030/.035 in. (0.8/0.9 mm) #196139 #194 011
.035/.045 in. (0.9/1.2 mm) #196140 #194 012
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.
 previous