Filter
Top Products
PROCESSES
Stick (SMAW) Welding
STICKMATE
®
LX 235 AC/160 DC
AC/DC Stick (SMAW) Arc Welding Power Source
211809
Aug. 2004
FEATURES BENEFITS
Accu-Set is an exclusive design for accurately controlling amperage or heat output. As you turn the Accu-Set
™
control,
the indicator more clearly shows the amperage setting.
The precise control of the STICKMATE LX 235 AC/160 DC allows the operator to adjust output by as little as 1-amp
increments. Users can always get the exact heat they need, unlike the step control design on competitive products.
Allows you to quickly select AC, DCEP or DCEN without adjusting the output leads.
100 amps AC/65 amps DC
Up to 150 amps available at 20% duty cycle. The STICKMATE LX 235 AC/160 DC model has 20% more DC output
than competitive products.
With two AC ranges to select from, you have greater control of weld performance.
Varnish protects and lengthens the life of the coils inside for increased reliability.
The cooling fan runs continuously and helps to extend the life of the power source.
Five-year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers);
and one year on guns (MIG and plasma torches).
Accu-Set
™
amperage indicator
Infinite current control
Output selector switch
High 100% duty cycle rating
High DC weld output
Two AC output ranges
Fully varnished magnetic coils
Forced-draft cooling fan
Hobart’s 5/3/1 Industrial Warranty
Rated Welding Output
225 amps at 25 VAC, 20% duty cycle @ 60 Hz;
15% duty cycle @ 50 Hz
150 amps at 25 VDC, 20% duty cycle @ 60 Hz;
15% duty cycle @ 50 Hz
Mode
AC
DC
Max. Open-
Circuit Voltage
80
80
Welding Amperage Range
High Low
40–235 30–150
30–160
Amps Input at Rated Output,
50 or 60 Hz, 230V
47.5
SPECIFICATIONS
(SUBJECT TO CHANGE WITHOUT NOTICE.) LIGHT INDUSTRIAL
Dimensions
H: 18-3/4 in (476 mm)
W:12-3/4 in (323 mm)
D: 17-1/2 in (445 mm)
Net Weight
104 lb (47 kg)
H
obart’s STICKMATE LX 235 AC/160 DC power
source lets you choose between AC or DC weld
output to expand your welding options to either AC
or DC Stick electrodes. DC output means fewer arc
outages, less sticking, less spatter, better control
on thin work, and easier out-of-position welding.
AC output produces less arc blow and easier starts.
The Accu-Set
™
(patented) design, provides accurate
heat control with infinite amperage control. Additionally,
STICKMATE LX allows a higher duty cycle when
amperage decreases, unlike some competitive
products in the market.
Applications:
Farms Hobbyists
Ranches Maintenance
Ornamental iron Individuals
Garages
Comes Complete with:
15 ft (4.5 m) electrode cable with
heavy-duty holder
10 ft (3 m) work cable with clamp
5 ft (1.5 m) primary cable with plug
Certified to both the Canadian and U.S. Standards for welding equipment.
Hobart Welders
An Illinois Tool Works Company
U.S. Distributor Sales Phone 920-735-4576 FAX 800-637-2315
Hobart Retail Sales Phone 800-332-3281 FAX 937-332-4161
Canadian Sales Phone 888-489-9353 FAX 519-421-0480
International Sales Phone 920-735-4509 FAX 920-735-4125
Web Site HobartWelders.com