Filter
Top Products
8 9
4. Place the tabs at the bottom of
the grill plate into the base of the
unit. Gently push the grill plate
back into place until you hear
a click sound indicating that the
grill is firmly latched. Fig. 4
Connect the power cord into a
standard AC outlet.
NOTE: Unit will not operate unless filters and grill are properly installed.
1. On/Off and Speed Settings
• To turn the air cleaner on, press the ON/OFF
button on the control panel.
When the air cleaner is on, the LED light in the ON/OFF button on the control
panel will be lit and the air cleaner will start to operate on LOW speed.
• Once the air cleaner is ON, press the + button to increase the fan speed to the
MED. setting. Press the + again to increase the fan speed to HIGH setting. To
decrease the fan speed, press the – button until your desired setting is reached.
The fan speed setting is indicated by the LED ring around the fan icon.
• To turn the air cleaner OFF, simply press the ON/OFF
button on the
control panel.
2. Timer
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours,
and 12 (twelve) hours. To activate the timer press the + button on the control panel
under the TIMER LED screen. Each time the + button is pressed, it will display
the successive settings. To return to a setting already passed, press the – button.
Once a timer setting has been selected, it will remain displayed on the LED screen.
To operate continuously, cycle through all timer settings until no timer setting is
displayed.
3. Oscillation
To activate the oscillation, press the
button. To stop oscillation, press the
button a second time. Unit will not automatically realign with foot when oscillation is
stopped. To achieve alignment, stop oscillation at the moment the body becomes
aligned with the foot.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Cleaning the HEPA Filters
Make sure that the air cleaner is turned OFF and unplugged from the outlet before
cleaning.
1. Open the rear grill by gently pushing
down on the tab on the top of the
grill plate. Fig. 5
2.
Open the plate outward until the
tabs at the bottom of the grill plate
easily slide away from the unit. Fig. 5
3. Remove the HEPA filters from the
main unit. Fig. 6
Note: There are two HEPA filters in
this air cleaner
Replacing HEPA Filters
The life of the HEPA filters is approximately 12-18 months under
typical household usage and conditions. We recommend replacing
your filters every year. To purchase the HEPA replacement filters,
model # AR-OTFL, go back to your retailer (where you purchased your
air cleaner), or visit www.homedics.com. After replacing your HEPA
filters, be sure to reset the filter indicator by holding the CLEAN FILTER
button until it beeps.