Filter
Top Products
2
Introduction
Product Overview
The IS48xx series are miniature laser scan engines. The non-decode IS4813 and IS4815 laser scan engines
are designed for direct integration into custom OEM devices equipped with a decoder. The engine’s small size
is ideal for integration into mobile computers, hand-held scanners, medical/diagnostic equipment, mobile
printers, lottery terminals, ATMs and access control devices.
For customer applications requiring integrated decode functionality in addition to solid scan engine
performance, the IS4823 and IS4825 models combine the miniature IS4813 and IS4815 engines with a
decoder and an optional mounting bracket for a complete small package that provides integration flexibility to
meet a variety of OEM applications.
The IS4813 and IS4815 deliver aggressive scanning with a digitized bar/space signal output. The IS4823 and
IS4825 provides a decoded output on all standard 1D bar code symbologies — including UPC, EAN, Code 39
and I 2 of 5 — as dense as 4 mil. The IS4823 and IS4825 models support TTL level RS232 or USB system
interface. They can operate in standard trigger mode, as well as “blinky” mode for hands-free scanning.
The IS48xx series is equipped with a multitude of features including:
• 100 scan lines per second
• Support for 3.3VDC input voltage (IS4813, IS4823)
• Support for 5VDC input voltage (IS4815, IS4825)
• A 650 nm bright laser diode
• A rugged die cast engine chassis with threaded mounting holes
• An optional mounting bracket for integration flexibility (IS4823, IS4825)
• A 10-pin (IS4813, IS4815) or 12-pin (IS4823, IS4825) ZIF connector with industry standard pinout for
seamless integration into portable devices
• Low mass property (see page 24) in an industry standard size
• A wide sweep angle for scanning larger bar codes up close
For ease of integration and optimum engine performance, a Software Development Kit (SDK) for the IS4813
and the IS4815 is available. Contact a customer service representative or sales representative for additional
information (see page 41).
Important Notes:
• The manufacturer of the end equipment must register with agencies such as the Food and Drug
Administration (FDA). The specifications required for registration are not obtainable until the OEM
manufacturer uses the IS4800 series scan engine in its final configuration. Therefore, it becomes the
responsibility of the manufacturer who incorporates the scan engine into their product to comply with all
federal laser safety regulations. The manufacturer must submit a Laser Product Report for the FDA in
the US.
• THIS DEVICE DOES NOT COMPLY WITH 21 CFR 1040. USE ONLY AS A COMPONENT.