Filter
Top Products
11
The Controls
Turn the Timer clockwise to select the required drying time.
The timer controls the drying time for both heat settings. All you have
to do is turn the Timer knob clockwise until it lines up with the required
time.
Never wind the Timer Control anti-clockwise.
This operation also starts the dryer, provided the door is closed and
the machine is plugged in.The “Guide to Drying Times” section will
tell you how much time you’ll need for various loads.
Setting the timer
Door Release
Heat Selection
Mains Light
(if fitted)
To open door, grip the handle and pull towards you.
If the door is opened while the Dryer is in use, the drying programme
cuts out automatically and the machine stops. When the door is
closed the Dryer will restart but you will not need to reset the Timer
Control.
You can however reset the Timer Control at any stage, should you
wish.
Select the appropriate button for low heat or for high heat.
With the switch IN High Heat is selected
With the switch OUT Low Heat is selected
The choice of HIGH HEAT or LOW HEAT depends upon the fabric you
wish to dry (see section “Sorting your Laundry”)
This light indicates that there is power being supplied to the dryer
when plugged into a suitable socket.
WARNING: CHILDREN HAVE BEEN KNOWN TO CLIMB INTO
TUMBLE DRYERS AND INJURE THEMSELVES. ALWAYS
ENSURE THAT THE MACHINE IS SWITCHED OFF AT THE
MAINS WHEN THE DRYER IS NOT BEING USED.