Husqvarna K960 Saw User Manual


 
20 – English
MAINTENANCE
General maintenance instructions
Below you will find some general maintenance instructions. If you have more questions, contact your service agent.
Daily maintenance
1 Check that the components of the throttle control work smoothly (throttle control and throttle trigger lock).
2 Check the tension of the drive belt.
3 Check the condition of the blade and the drive gear.
4 Check the condition of the blade guard.
5 Check the starter and starter cord and clean the outside of the starter unit’s air intake.
6 Check that nuts and screws are tight.
7 Check that the stop switch works correctly.
Weekly maintenance
8 Check, clean or replace the main filter.
9 Check that the handles and vibration damping elements are not damaged.
10 Clean the spark plug. Check that the electrode gap is 0.5 mm.
11 Clean the fins on the flywheel. Check the starter and the recoil spring.
12 Clean the cooling fins on the cylinder.
13 Check that the muffler is securely attached and not damaged.
14 Check the operation of the carburettor.
Monthly maintenance
15 Check the paper filter
16 Check the clutch centre, drive gear and clutch spring for wear.
17 Clean the outside of the carburettor.
18 Check the fuel filter and the fuel hose. Replace if necessary.
19 Clean the inside of the fuel tank.
20 Check all cables and connections.