Filter
Top Products
24 - English
The effectiveness of the planetary seal can be moni-
tored by the simple removal of the planetary motor
/ gearbox system by removing the four bolts shown
below.
If planetary seal is worn or needs replacement, contact
your Husqvarna Construction Products distributor for a
new planetary seal replacement kit.
If the planetary seal is working effectively, there should
be a very minimal amount of dust observed under the
cover of the machine. If there is a build-up of 5-6mm
(1/4 inch), then it is more than likely it is time to remove
the machine cover and check the condition of the plan-
etary seal.
Maintenance
Remove these bolts.
Remove 2 bolts either
side.
Remove this bolt.
Remove these bolts.
Remove cover off motor
terminal box.
Lift off machine cover to reveal chain ring and planetary
seal.
Inspect for dust build up
here