Filter
Top Products
Form 04579652-Edition 2 3
Product Safety Information
Intended Use:
These Air Percussive Hammers are designed for hammering, punching, cutting, chipping and
scraping material through repetitive application of linear impacts of a tool steel that is retained and
driven by the Hammer.
For additional information refer to Air Percussive Tool Product Safety Information Manual Form
04581450.
Manuals can be downloaded from www.irtools.com
Prior to Use
WARNING
• Do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet fuel. Use
only recommended lubricants.
• Use only proper cleaning solvents to clean parts. Use only cleaning solvents which meet current
safety and health standards. Use cleaning solvents in a well ventilated area.
Tools are coated inside and out with rust-resisting oil before leaving the factory. Before using the tool, remove
this oil by dipping the tool in a suitable cleaning solution to wash the oil from the exterior. Pour about 6 cm
3
of
a clean, suitable, cleaning solution into the air inlet and operate the tool for about 15 seconds. Dry the tool
immediately after cleaning, pour 3 cm
3
of Ingersoll-Rand No. 10 Oil into the air inlet and again operate the
tool for 5 seconds to lubricate all working parts.
Product Specifications
†K
pA
= 3dB measurement uncertainty
‡K
wA
= 3dB measurement uncertainty
Model
Type of
Handle
Blows
per
Minute
Stroke
Length
Sound Level dB (A)
(ISO15744)
Vibration
Level
(ISO8662)
Inch (mm)
† Pressure (L
p
)‡ Power (L
w
)
m/s
2
114G Pistol Grip 3,500 2-5/8 (67) 98.3 109.3 11.3
114GQC Pistol Grip 3,500 2-5/8 (67) 98.3 109.3 11.3