Filter
Top Products
3
PLACING TOOL IN SERVICE
Never use a heavy oil or an oil that forms gum.
Either will clog the small parts, restrict valve motion
and cause loss of efficiency. If the operation of the
Hamme r becomes sluggish, pour 3 cc of a clean, suitable
cle aning solution into the air inlet and operate the tool for
30 seconds. Lubricate in the regular manner immediately
after flushing.
M
A
IN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
COMPRESSOR
(Dwg. TPD905--1)
SPECIFICATIONS
Model Type of
Handle
Impact/min. Stroke Length HSound Level
dB (A)
♦Vibrations
Level
in. mm Pressure •Power m/s
2
115, 115--EU pistol grip 5 000 1--5/8 41 -- -- -- -- -- -- -- -- --
116, 116--EU pistol grip 3 500 2--5/8 67 104.4 117.4 30.0
117, 117--EU pistol grip 2 000 3--1/2 89 103.5 116.5 46.4
116H, 116H--EU pistol grip 3 500 2--5/8 67 104.4 117.4 30.0
117H, 117H--EU pistol grip 2 000 3--1/2 89 103.5 116.5 46.4
H Tested in accordance with PNEUROP PN8NTC1.2 under load
♦ Tested in accordance with ISO8662--2
• ISO3744