Filter
Top Products
16579013_ed4 5
1702P1 and 1702P4 Air Impact Wrench - Parts List
Item Part Description Part Number Item Part Description Part Number
1 Motor Housing Assembly 1702P-A40 39 Hammer Pin (2) 1702-704
2 Inlet Bushing 402-565 40 Hammer Case Assembly 1702-A727
3 Exhaust Silencer 202-311 41 Hammer Case Bushing 401-641
3A Exhaust Deector 1702P-123 * Warning Label WARNING-2-99
3B Deector Retaining Ring (2) 2908-304 * .005” Oversize Hammer Case Bushing 401-641-5
4 Reverse Valve 1702P-329 43 Hammer Case Gasket 2902-36
5 Reverse Valve O-ring (2) CE110-210 44 Hammer Case Cap Screw (3) 1702-638
6 Detent Ball R000B-263 45 3/8” Square Drive Anvil Assembly (with
1702-P726
7 Detent Ball Spring 202-664 Pin-Type Retainer)
8 Reverse Valve Knob 1702P-666 46 Socket Retaining Plunger 5020-716
9 Knob Screw WWA100-77 47 Retaining Plunger Spring 401-718
10 Grease Fitting 130SR-188 48 3/8” Square Drive Anvil Assembly (with
1702-A626
Throttle Valve Assembly 202-A302 Ring-Type Retainer)
11 Throttle Valve 202-302 49 Socket Retaining Ring 1702-425
12 Throttle Valve Face R000BR1C-283 50 Retainer Support Ring 1702-426
13 Trigger 5RA-93 Quick-Change Anvil Assembly (1/4” hex) 1702-A926-4
14 Throttle Valve Retaining Pin AF120-322 51 Quick-Change Anvil 1702-926-4
15 Throttle Valve Bushing 202-503 52 Thrust Ring Lock 5C1-853
16 Bushing O-ring, Large 410-283 53 Thrust Ring I0A902A2-932-4
17 Bushing O-ring, Small (2) 202-290 54 Retaining Sleeve Spring 2U-931-4
18 Bushing Retaining Pin R100B-120 55 Retaining Ball (5/32” diameter steel) 2U-696
19 Nameplate 1702P-301 56 Retaining Sleeve 2U-930-4
Exhaust Muer Kit 212-K23 57 Retaining Sleeve Stop 2U-933-4
20 Inlet Bushing Assembly 202-A565 Quick-Change Anvil Assembly (7/16” hex) 1702-A926-7
21 Bushing O-ring 202-103 58 Quick-Change Anvil 1702-926-7
22 Exhaust Deector 202-23 59 Anvil Body I0A902A5-925
23 Deector Gasket 202-223 60 Body Lock Pin I0A902A5-936
24 Exhaust Silencer 728-310 61 Thrust Ring Lock 4U-933-7
25 End Plate Gasket 202-739 62 Thrust Ring 4U-932-7
26 Rear Rotor Bearing Retainer MF-18 63 Retaining Sleeve Spring 4U-931-7
27 Rear Rotor Bearing 401-22 64 Retaining Ball (7/32” diameter steel) 2U-722
28 Rear End Plate 201-12 65 Retaining Sleeve I0A902A5-930
29 Rotor 401-53 * Tune-up Kit (includes illustrated parts
1702P-TK230 Vane Packet (set of 6 Vanes) 401-42A-6 5[2], 6, 7, 12, 16, 17[2], 21, 23, 24, 25,
31 Cylinder 401-3 26, 27, 30, 34, 43, 46 and 47)
32 Cylinder Dowel HH92-74 * Vertical Hanger 1901-365
33 Front End Plate 201-11 * Horizontal Hanger 1901-366
34 Front Rotor Bearing R00H-97 * Socket Adapter (3/8” to 1/2”) 2U-215
35 Hammer Frame Washer 1702-706 * Quick-Change Chuck
36 Hammer 1702-724A for 1/4” hex shank accessories 2U-A925-4
37 Hammer Frame Assembly 1702-A703A for 7/16” hex shank accessories 502-A925-7
* Not Illustrated.
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so
that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Related Documentation
For additional information refer to:
Air Impact Wrench Product Safety Information Manual 04580916.
Air Impact Wrench Product Information Manual 03531548.
Manuals can be downloaded from www.ingersollrandproducts.com.