Filter
Top Products
45661204_ed1 EN-1
EN
Product Safety Information
Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information
Manual Form 04580361.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Model
Drive
Recommended
Torque Range
Maximum
Torque
Average
Free
Speed
Average Air
Consumption
Free Speed Air
Consumption
Size ft-lb Nm ft-lb Nm rpm cfm l/min cfm l/min
170G 3/8” 10 - 55 14 - 75 55 75 170 3 85 20 566
1770G 1/2” 10 - 55 14 - 75 55 75 170 3 85 20 566
Model
Tool Weight Overall Length
Sound Level dB (A)
(ISO15744)
Vibration Level
(ISO8662)
lbs Kg inch mm † Pressure (L
P
) ‡ Power (L
W
) m/s
2
170G 2.6 1.2 10.4 264 94.8 105.8 3.9
1770G 2.6 1.2 10.4 264 94.8 105.8 3.9
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16571804-2 and table on page 2. Maintenance frequency is shown in
circular arrow and dened as h=hours, d=days, and m=months. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter 10. Grease - through tting
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.