Filter
Top Products
04579736_ed3 EN-1
EN
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrenches Product Safety Information
Manual Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Power Management System
The 2100G Impact Wrench incorporates a Power Management System that allows the operator
to select two power output settings. These settings are minimum power output or maximum
power output in the clockwise direction only. The Air Wrench will always operate at maximum
power output in the counterclockwise direction, no matter what power output level is selected.
The two power setting indicators on the rear of the housing are for reference only and DO NOT
denote a specic power output. The number 1 indicator designates minimum power output and
the number 2 setting indicator denotes maximum power output (See TPD2186 on page 2). The
power output can be further reduced in clockwise or counterclockwise by using the variable
throttle. Air supply systems which do not deliver adequate air pressure can aect power output
at all settings.
Product Specications
Model
Drive
Size
Recommended
Torque Range
Max. Torque
(Reverse)
Maximum
Free Speed
Blows Per
Minute
Tool
Weight
Overall
Length
ft-lbs (Nm) ft-lbs (Nm) rpm BPM lbs (Kg) inch (mm)
2100G 1/2” 25-350 (34-474) 550 (745) 9500 1200 4.3 (2) 7.4 (187)
Model
Average Air
Consumption
Air Consumption
@ Load
Sound Level dB (A)
(ISO15744)
Vibration Level
(ISO8662)
cfm l/min cfm l/min † Pressure (L
p
) ‡ Power (L
w
) m/s²
2100G 5 142 25 708 96.6 107.6 4.6
† K
pA
= 3dB measurement uncertanity
‡ K
wA
= 3dB measurement uncertanity