Filter
Top Products
04584587_ed4 5
211 and 212 Air Impact Wrench End - Parts List
Item Part Description Part Number Item Part Description Part Number
† 23 Rear Rotor Bearing Retainer MF-18 45 Retaining Sleeve Spring 2U-931-4
† 24 Rear Rotor Bearing 401-22 46 Retaining Ball (5/32” diameter steel ball) 2U-696
25 Rear End Plate 201-12 47 Retaining Sleeve 2U-930-4
26 Rotor 401-53 48 Retaining Sleeve Stop 2U-933-4
† • 27 Vane Packet (set/6) 401-42A-6 49 Hammer Case Assembly 1702-A727
28 Cylinder 401-3 50 Hammer Case Bushing 401-641
29 Front End Plate 201-11 51 Warning Label WARNING-2-99
30 Cylinder Dowel HH92-74 † • 52 Hammer Case Gasket 2902-36
† 31 Front Rotor Bearing R00H-97 53 Hammer Case Cap Screw (3) 1702-638
32 Hammer Frame Washer 1702-706 54 Horizontal Hanger 1901-366
33 Hammer Frame Assembly 1702-A703A 55 Vertical Hanger 1901-365
34 Hammer Pin (2) 1702-704 56 Socket Adapter (3/8” to 1/2”) 2U-215
35 Hammer 1702-724A 60 Quick Change Chuck
36 3/8” Square Drive Anvil Assembly
(with Ring-type Retainer)
1702-A626
for 1/4” hex shank accessories 2U-A925-4
for 7/16” hex shank accessories 502-A925-7
† • 37 Socket Retaining Ring 1702-425 61 Boot (for 211 only) 211-P32
†38 Retainer Support Ring 1702-426 * 0.005” Oversize Hammer Case Bushing 401-641-5
39 3/8” Square Drive Anvil Assembly
(with Pin-type Retainer)
1702-P726
* Tune-up Kit
for 212 212-TK2
† • 40 Socket Retaining Plunger 5020-716 for 211 211-TK2
† 41 Retaining Plunger Spring 401-718
Quick-Change Anvil Assembly (1/4” hex) 1702-A926-4
42 Quick Change Anvil 1702-926-4
43 Thrust Ring Lock 5C1-853
44 Thrust Ring I0A902A2-932-4
* Not Illustrated.
† Indicates Tune-up Kit part.
• To Keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each
part indicated by a (•) for every four tools in service.
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so
that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Related Documentation
For additional information refer to:
Product Safety Information Manual 04580916.
Product Information Manual 04584736.
Manuals can be downloaded from www.ingersollrandproducts.com.