Filter
Top Products
3
PLACING TOOL IN SERVICE
LUBRICATION
Ingersoll--Rand No. 50 Ingersoll--Rand No. 100
Always use of an air line lubricator. We recommend the
following Filter--Lubricator--Regulator Unit:
For International-- No. C28-- C4--FKG0
F o r U S A -- N o . C 2 8 -- 0 4 -- F K G 0 -- 2 8
After each forty--eight hours of operation, or as
experi ence indicates, inject about 4 cc of t he
recommended grease into the Grease Fitting (3).
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
COMPRESSOR
(Dwg. TPD905--1)
SPECIFICATIONS
Model Type of
Handle
Drive Impacts
per min.
Recommended
Torque Range
HSound Level
dB (A)
♦Vibrations
Level
in. ft--lbs (Nm) Pressure • Power m/s
2
231 pistol 1/2” sq. 1,200 25--300
(34--407)
102.0 115.0 5.2
231--2 pistol 1/2” sq. with
exte nded
anvil
1,200 25--300
(34--407)
102.0 115.0 4.2
H Tested in accordance with ANSI S5.1 --1971 at free speed
♦ Tested to ISO8662--1 loaded with frictionbrake to 9 RPM
• ISO3744
TPD1884
231
3 Letter
Date Code
location
A____