Filter
Top Products
16573974
Edition 3
March 2009
www.irtools.com
© 2009 Ingersoll Rand Company
313A, 314A, and 314M Air Sander and Polisher - Parts List
Item Part Description Part Number Item Part Description Part Number
1 Throttle Handle Assembly 313A-A160 9 Angle Housing Assembly
1A Throttle Handle --- for 313A 313A-A550
1B Inlet Bushing 313A-565 for 314A 314A-A550
Gasket Kit 313A-A283 for 314M 314M-A550
1C Throttle Gasket --- 9A Angle Housing ---
1D Cap Screw --- 9B Nameplate/Warning label
1E Lock Washer --- for 313A 313A-301
2 Lever Assembly 313A-A273 for 314A 314A-301
2A Throttle Lever --- for 314M 314M-301
2B Throttle Lever Pin --- 10 Exhaust Assembly 313A-A123
3 Throttle Assembly 313A-A302 10A Exhaust Deector ---
3A Throttle Valve Seal --- 10B Exhaust Gasket ---
3B Throttle Valve --- 10C Deector Retaining Screw ---
3C Throttle Valve Spring --- 11 Bearing Housing Assembly 313A-A555
3D Speed Regulator --- 11A Bearing Housing ---
3E Regulator Seal --- 11B Bearing Housing Gasket ---
3F Valve Cap Seal --- 11C Cap Screw ---
3G Throttle Valve Cap --- 11D Lock Washer ---
4 Rear End Plate Assembly 313A-A12 12 Arbor Assembly
4A Rear End Plate --- for 313A and 314A 313A-A591
4B Rotor Bearing --- for 314M 314M-A591
4C Bearing Rubber Cap --- 12A Arbor ---
4D Rotor Bearing Retainer --- 12B Arbor Lower Bearing ---
5 Rotor Assembly 12C Bearing Retaining Ring ---
for 313A 313A-A53 12D Bearing Cover ---
for 314A and 314M 314A-A53 12E Rotor Bearing ---
5A Rotor --- 12F Gear Retaining Ring ---
5B Vane (4) 313A-42-4 12G Gear Thrust Washer ---
6 Cylinder Assembly 313A-A3 13 Pad
6A Cylinder --- for 313A and 314A 313A-825-7
6B Cylinder Alignment Pin --- for 314M 314M-825-7
7 Front End Plate Assembly 313A-A11 14 Pad Nut
7A Front End Plate --- for 313A and 314A 313A-226
7B Rotor Bearing --- for 314M 314M-226
7C Pinion Bearing --- 15 Dead Handle 313A-48
8 Gear Assembly 16 Wrench Kit 313A-69
for 313A 313A-A552 16A Arbor Wrench ---
for 314A and 314M 314A-A552 16B Disc Wrench ---
8A Pinion Gear --- †18 Socket Retainer (2135TiMAX and 2135QTiMAX) 2135-425
8B Pinion --- Socket Retainer (2135PTiMAX and 2135QPTiMAX) 804-716
8C Arbor Key ---
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so
that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Related Documentation
For additional information refer to:
Rotary Air Sander, Polisher and Buer Product Safety Information Manual 04580387.
Rotary Air Sander, Polisher and Buer Product Information Manual 04580379.
Manuals can be downloaded from www.irtools.com.