Filter
Top Products
45661188_ed1 EN-1
EN
Product Safety Information
Intended Use:
This Air Reciprocating Saw is designed for cutting plastics, berglass, composites,
aluminum and sheet metal.
For additional information refer to Air Reciprocating Saw Product Safety Information
Manual Form 16578809.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Model
Strokes Per
Minute
Stroke Length Avg. Air Consumption
Air Consumption
@ Load
spm Inch mm cfm l/min cfm l/min
429G 10000 0.39 10 8 226 9 255
Model
Tool Weight
Length without
Blade
Sound Level dB (A)
(ISO15744)
Vibration Level
(ISO8662)
lbs Kg inch mm † Pressure (L
P
) ‡ Power (L
W
) m/s
2
429G 1.4 0.6 9.1 231 84.3 95.3 18.1
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16585382 and table on page 2. Maintenance frequency is shown in circular
arrow and dened as h=hours, d=days, and m=months. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.