Ingersoll-Rand 7235-C Grinder User Manual


 
HEAD SECTION
DISASSEMBLY
ASSEMBLY
Remove valve plug (30600) and valve components can be re-
moved from head. To remove lever throttle, remove roll pin
(Y178-28). To remove button throttle, remove roll pin
(Y178-212).
Assemble “O” ring (Y325-7) to valve stem. Assemble valve stem
into head. Assemble spring (30609) and regulator (30603) into
head, aligning hole in regulator with air inlet of head. Assemble
seal (30602) to head and secure valve components with “O” ring
(Y325-13) and valve plug (30600).
LEVER 30610
THROTTLE BUTTON30346
ADAPTER 328
VALVE PLUG 30600
I
30547 LEVER HEAD ASSEMBLY
JI INCLUDED IN 47052 LOCK-OFF LEVER ASSEMBLY
47052 LOCK-OFF LEVER ASSEMBLY
* 46548 ROLL PIN
32654 ADAPTER
HOUSING 30653-l
23902-210 CONNECTOR, l/4”
(NOT INCLUDED IN 30547-l
LEVER HEAD ASSEMBLY)
OPTIONAL 30547-l LEVER HEAD ASSEMBLY - LOCK-OFF TYPE
INCLUDES PARTS SHOWN IN THIS GROUP (EXCEPT CONNECTOR), PLUS: VALVE STEM (46135), “O” RING (Y325-7), SPRING (30609), AIR
REGULATOR (30603), SEAL (30602), “O” RING (Y325-13) AND VALVE PLUG (30600).