Filter
Top Products
HEAD SECTION
DISASSEMBLY
Remove nut (36778) and valve components can be removed
from head. To remove throttle button (36745), remove roll pin
(Y178-212).
ASSEMBLY
Lubricate “0” ring (Y326-7) with ARO 36460 lubricant and as-
semble to valve stem. Assemble valve stem, spring (32858), reg-
ulator and seal (36781) to head and secure with nut (36776).
NOTE: Align notch (or hole) in side of regulator with air inlet of
head when assembling.
ROLL PIN Y178-212
BUTTON 36745
MUFFLER 49192 *
HEAD 37078
ADAPTER 32854
“0” RING Y325-7
VALVE 35643
30131 WRENCH
10