Ingersoll-Rand 8655-B()-() Power Screwdriver User Manual


 
RECOMMENDED POWER AIR INLET SYSTEM
MALE THREAD CONNECTOR
MODEL 23904-310, 3/8” N.P.T.F.
MODEL 23104-400 COUPLER
1/2” FEMALE N.P.T.F.
1/2” I.D. HOSE WITH 1/2” N.P.T.F.
MALE FITTlNG EACH END (REC-
OMMENDED MAXIMUM LENGTH,
4 FEET)
INSTALL LUBRICATOR AS CLOSE
AS POSSIBLE TO TAPPER
-MODEL C28241-810 FILTER-REGULATOR-
GAUGE-LUBRICATOR ASSEMBLY
MODEL L26241-110 STANDARD
LUBRICATOR - 1/2” PORTS
GAUGE 100067. PRESSURE
RANGE 0 - 166 P.S.I.G.
MODEL R27241-100 STANDARD DUTY
REGULATOR, 1/2” INLET AND OUTLET
PORTS - 114” GAUGE PORTS.
MODEL F25241-110 STANDARD DUTY
FILTER - 3/8” PORTS
SHOWN BELOW IS THE SAME SYSTEM IN SCHEMATIC FORM
1/2” CAPACITY (C28241-810 ASSEMBLY)
0
L = LUBRICATOR
R = REGULATOR
F = FILTER
lf two units are to be installed, the units should be supplied with a system like that shown below or use two systems like that above.
1/2” CAPACITY
L
1/2” CAPACITY
MODEL L26241-110
18