Filter
Top Products
45549169
Edition 1
May 2008
www.irtools.com
© 2008 Ingersoll Rand Company
Models ELM0107N, ELM0110N and ELM0306N Micro Electric Screwdrivers Parts List
Item Part Description Part Number Item Part Description Part Number
1 Coupling TV03050 32 Idle Gear A (3) TV03026
2 Spring Adjusting Ring TV04251 33 Gear Base B Assembly (ELM0107N) TD02857
3 Rock Nut TV04255 Gear Base C Assembly (ELM0306N) TD03381
4 Stop Ring TV03034 Gear Base D Assembly (ELM0110N) TD03373
5 Holder Clamp TV03032 34 Idle Gear A (ELM0107N) (3) TV03026
6 Holder Spring TV04256 Idle Gear B (ELM0306N) (3) TV03745
7 Washer TV03035 Idle Gear C (ELM0110N) (2) TV03733
8 Bearing Plate Assembly TD04101 35 Roller pin 2mm Dia. - 9.8mm Dia. TV00337
9 Clutch Spring (ELM0107N/0110N) TV04297 36 Spacer TV03036
Clutch Spring for High Torque (ELM0306N) TV04299 37 Screw (ELM0110N/0306N) (2) TV01236
10 Washer TV04259 38 Motor Adapter (ELM0110N/0306N) TV03046
11 Nose Nut Assembly TD04098 39 Motor Assembly (ELM0107N) TD02860
12 Roller pin 2mm Dia. - 13.8mm Dia. (3) TV00858 Motor Assembly (ELM0306N) TD03452
13 Steel Ball 1.5mm Dia. (2) TV03039 Motor Assembly (ELM0110N) TD03459
14 Bit Holder 1 Assembly TD04438 40 Receptacle TD03753
15 BH-Adapter TV03934 41 Micro Switch TV00283
16 Pilot Spring TV04262 42 Change Over Switch TV03471
17 Spring Guide Ring TV04261 43 Spring for Trigger TV00333
18 Ring Plate TV04260 44 Trigger TV03909
19 Thrust Bearing TV03038 45 Frame A TD03211
20 Bit Holder-B TV04253 46 Frame B TD03211
21 Steel Ball 3.5mm Dia. (2) TV03040 47 Model Label (ELM0107N) ELM0107N-301
22 Cam TV03754 Model Label (ELM0110N) ELM0110N-301
23 Thrust Bearing TV03037 Model Label (ELM0306N) ELM0306N-301
24 Sheet TV04504 48 Warning Label ELM0107N-99
25 Micro Switch TV04507 49 Tapping Screw TV01231
26 Pilot TV04503 50 Screw TV01236
27 Gear Case TV04296 51 Earth Wire Assembly TD03212
28 Screw (2) TV01236 52 ESD Seal TV00870
29 Ring Gear TV03027 53 Clutch Spring for Low Torque (ELM0107N/0110N) TV04298
30 Ball Bearing TV04263 54 Cord Assembly TD04008
31 Gear Base Assembly TD04149 55 Lifting Hook Assembly TD02864
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so
that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Related Documentation
For additional information refer to:
Product Safety Information Manual 16573685.
Product Information Manual 45549144.
Maintenance Information Manual 45549177.
Manuals can be downloaded from www.irtools.com.