Ingersoll-Rand W150 Impact Driver User Manual


 
80226780_ed1 EN-1
EN
Product Safety Information
Intended Use:
These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
WARNING
Responsibly recycle or dispose of Batteries. Do not puncture or burn Batteries. Improper
disposal may endanger the environment or cause personal injury.
Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of
any other batteries may create a risk of re, personal injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form
04581146, Battery Charger Safety Information Manual Form 10567832 and Battery Safety
Information Manual Form 10567840.
Manuals can be downloaded from www.irtools.com.
Product Specications
Model
Voltage Drive
Impacts
per Minute
No Load
Speed
Recommended
Torque Range
Max.
Torque
V, DC
inch
(mm)
bpm rpm
ft-lbs
(N-m)
ft-lbs
(N-m)
W040 7.2
1/4
(6)
2500 0~2200
1~30
(2~40)
40
(54)
W150 14.4
3/8
(10)
3000 0~2200
25~130
(34~176)
150
(203)
W360 19.2
1/2
(13)
2200 0~1650
25~280
(34~380)
350
(475)
Model
Sound level dB (A)
(EN60745)
Vibration Level
(EN60745)
† Pressure (L
p
) ‡ Power (L
w
) m/s
2
W040 83.8 94.8 2.1
W150 90.8 101.8 5.6
W360 92.3 103.3 11.2
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
Lubrication
Remove hammer case to apply lubrication. Grease the anvil, impact mechanism assembly and
gears every 8 hours with Ingersoll Rand #100 grease. Apply grease evenly and sparingly. An
excessive accumulation of grease will result in sluggish operation.