Insignia NS-PWLC593-C Battery Charger User Manual


 
8
NS-PWLC593/NS-PWLC593-C
www.insigniaproducts.com
What other laptops can I use this adapter for?
The Insignia Slim Universal Power Adapter is compatible with
thousands of laptop models. A complete list of compatible
laptops can be viewed through the Tip Wizard at http://
bbyurl.us/tipfinder.
Why doesn't the tip fit into my laptop?
If the tip does not appear to fit into your laptop you may have
selected the incorrect tip for your laptop. The tip should fit
snugly inside the DC input jack on the side or back of your
laptop. If the tip does not fit into the jack, do not force the tip.
Confirm you have selected the correct tip for your laptop by
visiting the Tip Wizard at http://bbyurl.us/tipfinder. If you need
additional assistance please contact Insignia customer service at
(877) 467-4289.
Will using an incorrect tip damage my laptop?
The tips are designed to be used with specific laptops and so you
should only use the tip that is designated specifically for your
laptop. The correct tip can be identified by using the online Tip
Wizard at http://bbyurl.us/tipfinder.
The use of an incorrect tip may cause performance issues,
including the inability to charge the internal battery or power
the laptop, or the display of an error message on the laptop
screen. It is also possible that the use of an incorrect tip could
damage your laptop. For these reasons, it is necessary to use the
tip designed specifically for your laptop.
The label on my Insignia adapter says DC
OUTPUT: 16V/19V but my laptop is only 19V.
Will the adapter damage my laptop?
The 16V/19V rating refers to the capability of the adapter and it
signifies that it can safely provide power to laptops with voltages
within this range. After the correct tip has been selected, the
laptop and tip combination outputs the appropriate voltage for
your laptop. Please refer to the Tip Wizard at http://bbyurl.us/
tipfinder to find the correct tip for your laptop.
NS-PWLC593-NS-PWLC593-C_14-1282_MAN_V2_ENG.fm Page 8 Thursday, December 4, 2014 2:24 PM