Filter
Top Products
7
Store Presets
To Store a station into the Preset memory, tune to the station, to enter the preset
menu, press PRESET 2. Turn the tune knob to select the preset location (1-18)
where you wish to store the preset. when the preset position is displayed (for example
PRE1) press “SEEK V” to store the preset into memory. The screen will display “PR
SAVED” and your preset has been stored into memory.
Recall Presets
To recall a preset saved in memory, press PRESET 2 to enter the preset menu. Use
the tune knob to scroll through the stored preset stations. when the desired preset is
displayed, press the “SEEK Λ” button to select it.
Exit menus
Press PRESET 1 to exit the preset menu and continue playing the current station.
“EXIT” will be displayed when button is pressed. You can also wait the allotted 10
seconds and the menu will exit automatically.
8. Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “XM” icon. Immediately turn the TUNE KNOB to scroll through
available sources. Once “SIRIUS” is displayed, press PRESET 2
to select the
displayed mode.
Channel Up
Turn the rotary TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the rotary TUNE KNOB counter-clockwise to move down through the channels.
Category Selection
Press the “Category” icon then press the icon that corresponds with the Category
you wish to select.
Store Presets
Press and hold the preset button on which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Steering Wheel Controls
Press the “▲” button to cycle up through the presets.
Press the “▼” button to cycle down through the presets.
Press the “►I” button to tune within a category.