Filter
Top Products
MSR7007
10
SATELLITE RADIO OPERATION
Switching to Sirius Satellite Radio
(Requires optional Sirius tuner)
Press the MODE button (4) to change the mode to Sirius radio mode.
Accessing your RADIO ID
To display your radio ID, use the TUNE/TRK |<< button (18) to tune to channel “000”. The
screen will display “Sirius ID” on the top bar with the SID displayed in the middle of the LCD
screen. The Sirius Radio ID is 12 characters long.
Selecting a Band
In Sirius mode, press the BAND button (15) to access the Sirius user-preset channel groups in
the following order: SR-1, SR-2, SR-3.
Category Tuning
1. Press the INFO button (17) to access Category mode.
2. While the category is flashing, press TUNE/TRK |<< / >>| buttons (18, 19) to choose a
category.
3. Press the INFO button to confirm category selection and tune to the first channel in the
selected category. The category icon will stop flashing.
4. Press the TUNE/TRK |<< / >>| buttons (18, 19) to choose desired channels in that
category. (The lowest channel number within the chosen category will always be the
default first channel tuned.)
5. Press and hold the INFO button to return to channel tuning mode.
Channel Up/Down Tuning
Press the TUNE/TRK |<< / >>| buttons (18, 19) to search for a channel. Press and hold the
TUNE/TRK buttons to fast search.
Storing Preset Channels
The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your
favorite channels.
Programming Channels
1. Select the channel you want to store in memory.
2. Press and hold a preset button (5-10) until the corresponding preset button number
appears.
3. Repeat steps 1 and 2 to program additional channels.
Quick Tuning
Press one of the six preset buttons (5-10) to select a preset channel directly.
Preset Scan
Select a band. Press AS/PS (14) to scan stations stored in the current band. The unit will
pause for 10 seconds at each preset station. Press AS/PS again to stop scanning when the
desired station is reached.
Preset Tuning
Press and hold the AS/PS button (14) to access Preset Tuning Mode. In Preset Tuning Mode,
you can use the TUNE/TRK |<< / >>| buttons (18, 19) to access all 18 preset stations in
sequential order. Press and hold the AS/PS button again to deactivate Preset Tuning Mode.
Alternate Display Mode
Press the DISP/SCROLL button (12) to change the display information between single and
dual line text display. In dual line mode, both artist and title are available for viewing.
Press and hold the DISP/SCROLL button while in single line text display to start scrolling of
Artist/Song Title information.
Satellite Signal Strength
The display will indicate satellite reception strength as shown below.
Channel Lock
While tuned to the channel to be locked, press and hold the MODE button (4) to access the
Channel Lock function. “Enter Code” is displayed on the LCD. Using the 1-6 digit buttons, enter
your 4-digit code (the default code is 1111). “Channel Locked” appears on the LCD, confirming
that the channel has been locked. The next time the channel is sequentially accessed, the
“Channel Locked” message will appear, followed by “Enter Code”. To retrieve the locked
channel, enter your 4-digit code. To change the channel lock code, press and hold the PTY
button (13). Enter Current Code > New Code > Confirm. The LCD will display “New Code
Stored”.
3
16
5
11
6
12
7
13
8
14
9
15
10
4
2a
1
18
21
19
17
2b
MODE
MUTE
PTY
DISP
SCROLL
INFO
Signal Strength Strength Display
No Signal
Weak
Good
Excellent
X