Filter
Top Products
7
Specifications
The JET 15-Inch Vari-Speed Drill Presses, Models
J-A3816, J-A5816, and J-A5818 provide drilling
speeds from 400 to 5,000 rpm. Simple handwheel
adjustment sets the speeds with an LED speed
display on the faceplate of the machine.
JET's 15-inch vari-speed drill press provides a solid
base for drilling and offers a wide range of spindle
speeds. The large quill provides greater accuracy.
The large worktable provides the operator with room
to work and ample support for the workpiece. The
drill press has a 3-inch diameter column for head
and table support. The 15-Inch Vari-Speed Drill
Press is equipped with a standard table raiser.
Model J-A3816 J-A5816 J-A5818
Stock Number ..................354500 .................... 354550 ...................... 354551
Type.................................Floor Model ............. Floor Model ............... Floor Model
Motor:
Motor Speed (rpm)......1,725 rpm................ 1,725 rpm .................. 1,725 rpm
HP...............................1 HP ........................ 1 HP .......................... 1 HP
Power Rating ..............1 Ph, 115/220V ....... 1 Ph, 115/220V.......... 3 Ph, 220/440V
Spindle speed (rpm) ........400 to 5,000rpm ..... 400 to 5,000 rpm ....... 400 to 5,000 rpm
Capacity:
Cast iron .....................up to 5/8-in. ............ up to 5/8-in. ............... up to 5/8-in
Steel............................up to 1/2-in. ............. up to 1/2-in. ............... up to 1/2-in.
Drills to center..................15 in. ....................... 15 in........................... 15 in.
Quill diameter...................2-1/4 in. ................... 2-1/4 in. ..................... 2-1/4 in
Quill travel........................6 in. ......................... 6 in............................. 6 in.
Spindle taper....................#2 Morse Taper....... #2 Morse Taper......... #2 Morse Taper
Dimensions:
Table (overall) ............15-1/4 x 17-3/4 in. ... 15-1/4 x 17-3/4 in. ..... 15-1/4 x 17-3/4 in.
Table (working area)...12-1/2 x 14-1/2 in.... 12-1/2 x 14-1/2 in. ..... 12-1/2 x 14-1/2 in.
T-slot...........................1/2-in. ...................... 1/2-in. ........................ 1/2-in.
Spindle to table...........41 in. ....................... 41 in........................... 41 in.
Spindle to base...........47-1/2 in. ................ 47-1/2 in. ................... 47-1/2 in.
Overall height...................67-1/2 in. ................ 67-1/2 in.