Filter
Top Products
16 Operator’s Manual
INSTALLATION
Read safety warnings before setting-up the unit.
Ensure the oil level in the unit's pump is adequate. If low, add
SAE-30W non-detergent oil.
LOCATION:
In order to avoid damaging the unit, do not incline the unit transversely
or longitudinally more than 10°.
WARNING: RISK OF ASPHYXIATION! DO NOT
OPERATE IN AN ENCLOSED AREA. USE THIS
PRODUCT ONLY IN WELL VENTILATED AREAS!
THE EXHAUST FROM THE ENGINE CONTAINS
CARBON MONOXIDE, A POISONOUS, ODORLESS
AND INVISIBLE GAS. BREATHING THE GAS CAN
CAUSE SERIOUS INJURY, ILLNESS AND
POSSIBLE DEATH.
WA RNI NG: RI SK OF EX PL OSI ON OR FI RE
CAUSING SERIOUS INJURY OR DEATH! DO NOT
ALLOW THE ENGINE OR MUFFLER TO COME IN
CONTACT WITH FLAMMABLE VAPORS,
COMBUSTIBLE DUST, GASES OR OTHER
COMBUSTIBLE MATERIALS. A SPARK MAY
CAUSE A FIRE.
WHEN USING THE UNIT FOR SPRAY PAINTING,
PLACE THE UNIT AS FAR AWAY FROM THE WORK
AREA AS POSSIBLE, USING EXTRA AIR HOSES
IF NEEDED.
Place unit at least 12 inches away from obstacles that may prevent
proper ventilation. Do not place unit in an area:
- where there is evidence of oil or gas leaks.
- where ammable gas vapors or materials may be
present.
- where air temperatures fall below 32°F or exceed 104°F.
- where extremely dirty air or water could be drawn into the unit.
Installation