John Deere ET-3506-J Drill User Manual


 
1/2-Inch and 3/8-Inch Drill Operator's Manual 9
Functional Description
NOTE: The information contained in this Instruction Manual is designed to assist
you in the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read
and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that
differ from those on your own power tool.
MODEL:
ET-3505-J
ET-3506-J
NAME OF PARTS:
1/2-Inch Drill (ET-3505-J)
3/8-Inch Drill (ET-3506-J)
(Fig. 1)
SPECIFICATIONS:
Drill ET-3505-J and ET-3506-J:
Model ET-3505-J ET-3506-J
Motor Single Phase, Series Commutator Motor
Power Source Single Phase 120V AC 60 Hz
Current 9.0A
No-Load Speed 0-850/min. 0-3000/min
Drill Chuck Capacity 1/2" (13mm) 3/8" (10mm)
Electric Brake Yes No
Capacity:
Steel-
Twist Bit 1/2" (13mm) 3/8" (10mm)
Hole Saw 2" (51mm)
Wood-
Flat Spade Bit 1-1/2" (38mm) 1" (25mm)
Auger Bit 1-1/4" (32mm)
Self Feed Bit 2-1/8" (54mm)
Hole Saw 4" (102mm) 1-1/8" (29mm)
Weight (without cord) 4.6 lbs (2.1kg) 4.0 lbs (1.8kg)