Filter
Top Products
BATTERY PACK CHARGING TIME
BATTERY ONE TWO
BN-V907U approx. 100 min.* approx. 200 min.*
* When charged at temperatures between 20° and 25°C.
● When charging Battery Packs after a long storage period, charging time will be longer than the
time indicated above.
SUPPLYING POWER
You can connect the camcorder or its Docking Station directly to an AC outlet using the AA-V90EK
AC Power Adapter/Charger.
DURING USE . . .
● The AC Power Adapter/Charger AA-V90EK is specifically designed to charge BN-V907U Battery
Packs.
● When charging a brand new Battery Pack, or one that’s been in storage for an extended period,
the Charging Indicator may not come on. In this case, remove the Battery Pack, then reattach
and try charging again.
● If you connect the DC Cord to the DC Connector while a Battery Pack is being charged, power
will be supplied to the camcorder and charging will end incomplete.
● Vibration noise can sometimes be heard coming from the inside of the AC Power Adapter/
Charger. This is normal.
● The AC Power Adapter/Charger processes electricity internally, and will become warm during
use. This is normal. Make sure to use the AC Power Adapter/Charger in well-ventilated areas
only.
● If the battery operation time remains extremely short even after having been fully charged, the
battery is worn out and needs to be replaced. Please purchase a new one.
DC-IN
Indoor Use
When using the camcorder indoors, you can use the
AC Adapter instead of a battery.
1
SUPPLY POWER TO ADAPTER
Plug the AC Adapter/Charger's power cord in to
an AC outlet.
2
SUPPLY POWER TO CAMCORDER
Connect the AC Adapter to the camcorder.
NOTE:
When using the provided DC cord, make sure you
connect the end of the cable with the core filter to
the camcorder. The core filter improves performance
of equipment.
COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD.
EK
Printed in Japan
0997MKV
*
UN
*
VP
To AC outlet
Power cord
AC Power
Adapter/Charger
DC cord
Core Filter
Connector is
under this cover
SPECIFICATIONS
Power AC 110 — 240 V, 50/60 Hz
Power consumption 20 W
Output power DC 7.2 V, 0.75 A (When charging)
DC 6.3 V, 1.8 A (When supplying power)
Operating temperature 0 — 40°C
Charging temperature 10 — 35°C
Dimensions 94 (W) x 36 (H) x 122 (D) mm
Weight Approx. 380 g