Filter
Top Products
8
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
1
Select the band (FM1, FM2, FM3 or
AM).
Note:
This receiver has three FM bands (FM1, FM2, and
FM3). You can use any one of them to listen to an FM
broadcast.
2
Start searching for a station.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching for a station manually:
Manual search
1
Select the band (FM1, FM2, FM3, or
AM).
2
Press and hold ¢ or 4
until “M (manual)” starts flashing on
the display.
3
Tune in to a station you want while
“M” is flashing.
• If you release your finger from the button, the
manual mode will automatically turn off after 5
seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM and
9 kHz for AM) until you release the button.
EX
DIRECTORY
Selected band appears.
When a station is received, searching
stops.
FM1
FM2
FM3
AM
To search stations of
higher frequencies
To search stations of
lower frequencies
Press ¢ to tune in
to stations of higher
frequencies.
Press 4 to tune in
to stations of lower
frequencies.
FM1
FM2
FM3
AM
EN08-11KW-XC828[U] 02.1.30, 5:33 PM8