JVC LYT0232-001B Battery Charger User Manual


 
EN-9
ENGLISH
How to charge
*The shape of the plug varies
depending on the country.
1
Connect the power cable to the main unit's AC
connector.
2
Insert the batteries as detailed in "How to insert the
batteries" in the instructions.
3
Insert the power plug into an electrical outlet
(AC220 – 240 V). The charge indicator lights and
begins charging the batteries.
Do not load or eject batteries during recharging.
4
Four provided batteries can be charged in about 150
minutes.
When charging is complete, the charge indicator
goes out.
5
Be sure to disconnect the power plug from the outlet
when charging is complete. Then remove the
batteries.
When the batteries being charged or the charger reaches a
temperature of more than 40 °C, the charge indicator blinks
slowly and enters a waiting mode. When the temperature
returns to proper levels, the indicator lights steadily and
automatically resumes charging.
Notes:
Periodically wipe off the positive and negative terminals of the charger and batteries with a dry cloth. Dirt build-
up may prevent batteries from being charged.
Batteries may become warm while charging, but this is not malfunction.
Noise may appear on the radio or television during charging. In this case use an outlet separate from them.
Avoid charging or discharging close to a heat source (such as in front of a heater or in direct sunlight).
Charge batteries within the temperature range of 0°C - 40°C .