Filter
Top Products
935.434/C/0108/7.8d/e
Reception of vertically polarised signals
DVB-T signals can also be transmitted in vertical polarisation.
In order to receive vertically polarised signals, the ZTA 11 (218010) boom is required. Together with the boom, the antenna must
be mounted rotated 90° counter-clockwise in longitudinal alignment to the transmitter. The rotational direction must be observed
to avoid water seeping through the cable inlet into the connection socket. When properly mounted, the cable exit is directed
downwards and the Kathrein signature can be read horizontally (Fig. 6). If mounted incorrectly, the Kathrein signature will be
upside-down.
Recommended accessory: ZTA 11
Boom - 218010 (Not included in the
delivery scope)
ZTA 11
Cable exit tilted slightly downwards
Fig. 6
450 mm
Fig. 5
60 mm Ø max.
transmitter