Filter
Top Products
SPECIFICATIONS
SPECIFICATIONS
Voltage 120V 60 Hz
Rated Power Low Heat (Position 1): 1000w
High Heat (Position 11): 1500w
Blowing Speed Low Heat (Position I): >400L/min
High Heat(Position II): >550L/min
Air Temperature Low Heat (Position I): 700°F (375°C)
High Heat (Position II): 920°F (495°C)
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the following products, please contact Alltrade Customer
Service Department at 1-800-590-3723.
Cordless Drills/Screwdrivers
Impact Wrenches
Sanders
Jigsaws
Circular Saws
Angle Grinders
Reciprocating Saws
Routers
Rotary Tools
Corded and Cordless Multi-Purpose Tools
Wide Range of Accessories and more
16
MAINTENANCE AND CLEANING
CLEANING: To avoid accidents, be sure to disconnect the
tool from the electrical power source before any cleaning or maintenance.
Avoid using certain cleaning agents and solvents.
Chemicals like gasoline, carbon tetrachloride, acetone, paint thinner or ammo-
nia products can damage the plastic parts of the tool. Use a soft dry brush to
keep the intake openings free of debris. Do not immerse the tool in liquid or
allow any liquid to get inside the outer casing.
STORAGE
Make sure the nozzle of the heat gun has cooled to room temperature before stor-
age. After many uses, the nozzle will become darkened by the heat, but this will not
interfere with the performance of the tool.
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.
If you must use an extension cord, be sure that the gauge is large enough to carry
the amount of current necessary for your power tool. If not, your tool may experi-
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge
number, the heavier the cord (see table below).
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
TOOL CURRENT RATING CONDUCTOR SIZE IN A.W.G
AMPERE 10FT. 25FT. 50FT. 100FT.
3-6 18 18 18 18
6-8 18 18 18 16
8-10 18 18 18 14
10-12 16 16 14 14
12-16 14 12 12 -
16-20 12 12 12 -
15