Filter
Top Products
FFUUNNCCTTIIOONNAALL DDEESSCCRRIIPPTTIIOONN
CCOONNTTRROOLLSS AANNDD CCOOMMPPOONNEENNTTSS::
1. Adjustable Pivoting Shoe
2. Blade Clamp
3. Locking Lever
4. Variable Speed Control Wheel
5. Lock-Off Button
6. Trigger Switch
7. Power Cord
AACCCCEESSSSOORRIIEESS::
8. Saw Blades (2)
AASSSSEEMMBBLLYY
DDiissccoonnnneecctt tthhee ppoowweerr pplluugg ffrroomm tthhee AACC ppoowweerr ssoouurrccee
bbeeffoorree aannyy aasssseemmbbllyy,, aaddjjuussttmmeennttss,, oorr aaddddiinngg//rreemmoovvi
inngg aacccceessssoorriieess..
Following this preventative step reduces the risk of the drill coming on acciden-
tally and the risk of damage to the workpiece and injury to the operator.
AATTTTAACCHHIINNGG // RREEMMOOVVIINNGG BBLLAADDEE
IINNSSTTAALLLLIINNGG TTHHEE BBLLAADDEE
• Rotate the spring-loaded blade holder (1) counter-clockwise as far as it will
turn.
• Fully insert the appropriate blade (2) into the slot in the center of the blade
holder.
NNOOTTEE
: Make sure the blade is fully inserted into the blade collar and the blade
teeth are pointing downward.
• While holding the blade fully into the blade holder, release the collar. It will auto-
matically return to its original position, locking the blade in the holder.
• Pull outward on the blade to ensure it is properly locked in the blade holder.
RREEMMOOVVIINNGG TTHHEE BBLLAADDEE
To remove the blade, simply rotate the blade holder counter-clockwise and pull the
blade out of the blade holder.
AADDJJUUSSTTIINNGG TTHHEE PPIIVVOOTTIINNGG SSHHOOEE
The pivoting shoe will pivot to follow the angle of the blade to the workpiece. This
action ensures the flat surface of the shoe is against the workpiece for better cut-
ting action and easier control of the saw.
The shoe can be adjusted in or out, allowing the use of the blade teeth at different
points of the blade. This will provide longer blade life as one section of the blade
becomes dull.
9 10
6
3
4
5
7
1
2
8
BLADE CLAMP