Filter
Top Products
AATTTTAACCHHIINNGG TTHHEE BBLLAADDEE
1. Firmly grip the plastic blade guard and slide it up to expose the blade clamp.
2. Using a hex wrench (provided in a slot beneath the motor), loosen the two hex
socket-head screws on the blade clamp until it slides forward enough to open a
slot for the blade.
3. Insert the blade into the blade clamp with the cutting edge facing to the front of
the jigsaw.
4. Using a hex wrench, securely tighten the two hex socket-head screws on the
blade clamp.
5. Using a hex wrench, loosen the two hex socket-head screws holding the bottom
board and the guide roller on the saw housing.
6. Slide the guide roller forward until the back of the blade fits loosely in the center
groove. Using a hex wrench, securely tighten the two hex socket-head screws hold-
ing the guide roller and bottom board to the saw housing.
109
FFUUNNCCTTIIOONNAALL DDEESSCCRRIIPPTTIIOONN
CCOONNTTRROOLLSS AANNDD CCOOMMPPOONNEENNTTSS::
1. Trigger
2. Trigger Lock
3. Speed Control Adjusting Switch
4. Gear Housing
5. Blade Guard
6. Blade Holder
7. Blade
8. Roller Guide
9. Stroke Adjustment Switch
AASSSSEEMMBBLLYY
DDiissccoonnnneecctt pplluugg ffrroomm AACC ppoowweerr ssoouurrccee bbeeffoorree
aasssseemmbblliinngg ppaarrttss,, mmaakkiinngg aaddjjuussttmmeennttss,, oorr cchhaannggiinngg bbllaaddees
s..
Failure to
remove electrical power could cause accidental starting of the jigsaw resulting
in serious injury to the operator and/or damage to the tool.
10. Bevel Markings
11. Bevel Plate
12. Base Plate
13. Hex Wrench Storage
14. Power Cord
15. Power Cord Strain Relief
16. Vacuum Attachment
17. Hex Wrench
18. Rip Fence Guide
1
16
15
11
12
14
13
10
9
2
3
4
5
6
17
18
8
7