Kompernass KH 3006 Laser Level User Manual


 
- 1 -
360° Line Laser KH 3006
Read the operating instructions carefully
before using the appliance for the first
time and preserve this booklet for later
reference. Also, give these operating in-
structions to whoever might acquire the
appliance at a future time.
Safety instructions
Risk of personal injury!
Keep and store the appliance out of
the reach of children.
This laser appliance contains a Class 2 Laser.
NEVER direct the laser beam at people or
animals. NEVER look directly into the laser.
The laser beam can cause serious eye
damage.
Do NOT direct the laser beam at strongly
reflective material. Reflected laser beams
are also dangerous.
In the event of the batteries leaking
acids, wear protective gloves. There is
a risk of receiving chemical burns!
Beware of appliance damage!
NEVER subject the appliance to rain.
Do not use the appliance in wet or
moist environments.
Do not use the appliance at locations
where there is a danger of fire or explo-
sion, e.g. in the vicinity of inflammable
liquids or gases.
All adjustments intended to increase
the laser power are forbidden.
To avoid damage to the appliance,
arrange for repairs to be carried out
only by our Customer Services Depart-
ment or qualified specialists.
Regularly check the condition of the
batteries. Leaking batteries can cause
damage to the laser appliance.
If you do not intend to use the laser
appliance for an extended period,
remove the batteries.
Always change all batteries at the same
time and always use batteries of the
same type.
Clean the battery compartment with
a dry cloth.
No liabilty will be accepted for damage
resulting from manipulation to the laser
equipment as well as from disregarding
these safety instructions.
Intended use
The appliance is intended for use in making
alignments and determining angles in
domestic construction work.
The appliance is intended for domestic
purposes only, not for commercial purposes.
Items supplied
Laser appliance with rotating plate
2 Batteries 1.5 V,
Type AAA/LR03
Operating instructions
Warranty card
Technical Data
Power supply:
2 Batteries 1.5 V, Type AAA/LR03
Measurement accuracy:
± 6,35 mm over 5 meters
Laser class 2
(5mW, λ= 650 nm)
IB_KH3006_BL5778_EN.qxd 12.06.2007 11:46 Uhr Seite 1