Kompernass KH 4077 Work Light User Manual


 
- 3 -
Description of the appliance
q
ON/OFF Switch
w
Floodlight lever
e
Halogen floodlight
r
Protective grill
t
Knurled screw
y
Crossbeam
u
Telescopic stand
i
Power cable
o
Knurled screw
a
Fixing ring
s
Distributor box
d
Knurled screw
f
Fixing screw
g
Glass cover
Assembly
ƽ
Danger of electrical shock
Never insert the plug into an electrical socket until
the appliance has been completely assembled.
ƽ
Danger of burns
Only touch the halogen lamps when they are in a
switched-off and cooled-down condition. The halo-
gen lamps will get very hot. Never touch the light-
bulb with bare hands, always use a clean and dry
lint-free cloth.
Opening up the pedestal base
To set up the telescopic stand
u
, loosen the
knurled screw,
o
. The pedestal base can now
be opened out to the floor.
Turn the knurled screw
o
until it is tight.
Assemble the protective grill
r
on to
the halogen spotlights
e
Insert the lower pegs of the protective grill
r
into the recesses on the corners before the glass
covering
g
.
Squeeze the protective grill
r
so far together
that the pegs on the other side of the protective
grill can be inserted into the recesses there.
Do the same with the second halogen spotlight
Mounting the halogen floodlights
e
on the crossbeam.
Insert the knurled screw
t
with the washer
through the hole in the bracket of the halogen
floodlight
e
.
Insert the halogen floodlight
e
with the knurled
screw
t
in the pre-drilled hole on the crossbe-
am
y
. Ensure that the Stoppers are located be-
hind the halogen floodlights
e
.
Turn the knurled screw
t
until it is tight.
Assembling the crossbeam on the
telescopic stand.
Insert the knurled screw
d
first of all through the
hole in the distributer box
s
, then through the
hole in the crossbeam
y
.
Now assemble the crossbeam
y
and the distri-
butor box
s
with the assistance of the knurled
screw
d
on the telescopic stand
u
.
Turn the knurled screw
d
until it is tight.
Adjusting the height of the Stand
Halogen Floodlight
Loosen the fixing ring
a
by turning it in an
anti-clockwise direction.
Adjust the telescopic stand
u
to the desired
height.
Retighten the fixing ring
a
by turning it in a clok-
kwise direction.
IB_KH4077_BK1968_LB3 07.12.2007 11:37 Uhr Seite 3