Filter
Top Products
10
Turn the connection valve back and forth to make it easier to remove.
When removing the connection valve air can escape from the valve of
the object that has been inflated. Therefore ensure that the connection
valve is removed as quickly as possible.
7.2 Using the Mini Compressor to measure inflation
pressure
NOTE:
For measuring the pressure of an inflated object the Mini Compressor
does not require electricity.
1. Follow steps 3 to 6 in chapter 7.1 „Using the Mini Compressor to
inflate objects“.
2. Read off the inflation pressure on the mamometer
w
of the
Mini Compressor.
3. To conclude, follow step 12 in chapter 7.1 „Using the
Mini Compressor to inflate objects“.
8. Storing the Mini Compressor
Always store the Mini Compressor at a clean and dry location.
To avoid damage, make sure that the air line
e
and the power cable
t
are not folded.
IB_KH4106_UL33284_LB4C 22.04.2009 17:22 Uhr Seite 10