Filter
Top Products
•* For polishing plastics use a felt polishing disc
1
. For polishing metals use a buffing disc
1
. Select a slow speed – turn the speed control
wheel ባ to setting 1.
•* For removing paint from metal use an appropriate abrasive disc
1
. Select a slow to medium speed – turn the speed control wheel ባ
to setting 2-3.
•* For grinding metal and stone use an appropriate grinding disc
1
. Select a medium to high speed – turn the speed control wheel ባ
to setting 4-6.
•* For rough grinding metals use an appropriate roughing disc
1
. Select a high speed – turn the speed control wheel ባ to setting 6.
•* = These are advisory recommendations only. Before you start work, you should carry out a test to see which speed is most suitable for your work.
1
= These accessories are not supplied with the angle grinder.
Further practical tips for power tools can be found in the accompanying booklet on safety advice.
We reserve the right to make technical modifications in the course of further development.
STATEMENT OF CONFORMITY
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, hereby declare that this product conforms
with the following EC regulations:
EC low voltage regulations:
Electromagnetic compatibility:
Applicable harmonised standards:
Manufacturer: PARKSIDE
Model type: PWS 1100
Description: ANGLE GRINDER
Bochum, 30.09.2002
Hans Kompernaß
- Managing Director -
(98/37 EEC)
(73/23/EEC), (93/68 EEC)
(89/336 EEC),
EN 50144-1:1998; DIN VDE 0740 Teil 21:1994
EN 55014-1:1993 +A1 +A2;
EN 61000-3-2:1995 +A1 +A2; EN 61000-3-3:1995
EN 55014-2:1997
7