Filter
Top Products
11 GB/IE/CY
Operation / Maintenance and care / Disposal / Information
Q
Regenerating / charging empty
(used, overcharged) batteries
If the charging station is connected to a battery
and the charging process starts it automatically rec-
ognises the battery voltage. It changes to pulse
charging mode if the voltage is in the range of
7.5 V ± 0.5 to 10.5 V ± 0.5 V.
This pulse charging process is continued until the
battery voltage has increased to 10.5 V ± 0.5 V. As
soon as this condition is reached, the charging sta-
tion changes over to the previously selected normal
charging mode.
Now the battery can be charged quickly and safely.
Most empty batteries can be charged and used
again using this procedure.
Q
Protective function of the device
If a unexpected situation should occur, such as short
circuiting, battery voltage below 7.5 V, open circuit
or reversed connection of the output terminals, the
charging station deactivates the electronic system
and immediately switches back to basic position to
avoid damage.
If you do not activate any settings, the system will
remain in STANDBY mode. With the inverse con-
nection of the output clamps the LED display „in-
correct polarity / fault“
5
lights up additionally.
Q
Overheating protection
If the appliance becomes too hot during charging,
the power output is automatically reduced. This
protects the appliance from damage.
Q
Maintenance and care
m Caution! Danger of electric shock!
Only install, maintain and service the appli-
ance when it is disconnected from the mains!
The appliance is maintenance-free.
j Switch off the appliance.
j Clean the plastic surfaces of the appliance and
the remote control with a dry cloth. Do not un-
der any circum-stances use solvents or other
aggressive cleaning agents.
Q
Disposal
The packaging is wholly composed of envi-
ronmentally-friendly materials that can be
disposed of at a local recycling centre.
Do not dispose of electrical
appliances in household waste.
In accordance with European Directive
2002 / 96 / EC on used electrical and electronic
appliances and its implementation in national law,
used power tools must be collected separately and
recycled in an ecologically compatible manner.
Please return the tool via the available collection
facilities.
Information on options for disposing of electrical
appliances after their useful life can be obtained
from your local or city council.
Q
Information
Q
Servicing
The service centre for your country is shown in the
guarantee documentation.
J Have your device repaired only by qualified
specialist personnel using original manufactur-
er parts only. This will ensure that your device
remains safe to use.
J If the plug or mains lead needs to be replaced,
always have the replacement carried out by
the manufacturer or its service centre. This will
ensure that your device remains safe to use.